Architectural Polymers

12th January 2023

Accessories/SDS

AP 2550 Form Oil

2550 Form Oil is a chemical release agent specially formulated to give easy release of plastic and thermoplastic mold liners providing high quality surface finishes to concrete. Form oil is suitable for use on plastic mold liners with excellent results. It is a suspension and sediment free, highly mobile liquid, which can be used in fine sprays without clogging the jets. There is no unpleasant odor, even when using a fine fog spray. Provides a quick, positive release of molds, reducing labor costs and damage to molds. Very economic coverage rates can be obtained without difficulty. 2550 Form Oil may be used for metal or timber mold boxes holding the mold liner, allowing easy cleaning of all equipment. It retains its mobility at low temperatures. It drastically reduces the incidence of blowholes, surface blemishes, and staining. It may be applied prior to casting, or treated molds may be left until apparently dry.

AP Form Liner Glue

AP Form Liner Glue consists of two liquids: Part A and Part B. After mixing by weight or volume into a water-like self-leveling liquid or thick trowelable consistency, AP Form Liner Glue will cure overnight to bond any two porous or polyurethane components.

MCA/MCIA Construction Adhesive

MCA/MCIA Constuction Adhesive is used to adhere thin brick to plastic form liner. Construction adhesive from AP is available in either standard (MCA 1.0) or inverted (MCIA 1.0) aerosol cans.

MSW Brick Wax

A thin coating of MSW 1.0 brick wax protects the face of thin brick for precast, cast-in-place, and tilt-up concrete projects. MSW 1.0 brick wax is available in quart, 1-gallon or 5-gallon containers.

EaCoChem Brick Cleaner

OneRestore is a breakthrough product that provides remarkable versatility, cleaning power, and safety all in one. Capable of removing the deepest stains from virtually any surface, it is also used to safely restore glass and anodized aluminum.

Laticrete Epoxy Bond Adhesive

LATAPOXY 300 Adhesive is a chemical resistant epoxy adhesive that will bond to most sound, clean surfaces. Adhesive spreads easily and cleans with water while fresh. LATAPOXY 300 Adhesive is a factory-proportioned kit consisting of epoxy resin, hardener, and chemical resistant silica filler. LATAPOXY 300 Adhesive can be used in interior and exterior (see limitations) walls and floors, wet and dry areas.

Laticrete Pointing Mortar

MVIS Pointing Mortar is for adhered stone, thin brick, and manufactured masonry veneers. Factory prepared and designed to be mixed with water. Formulated from a blend of high strength portland cement, graded aggregates, and color-fast pigments. Provides a joint that is dense, hard, and durable.

AP 75-70 Liquid Rubber

AP 75-70 Liquid Rubber is a two-part liquid polyurethane system that cures (RTV) to a gray, Shore A70 rubber. This is a pourable rubber, but it can be easily thickened with PolyFiber II Thickener for brush-on application.

AP 75-65 Liquid Rubber

AP 75-65 Liquid Rubber is a two-part liquid polyurethane system that cures (RTV) to a yellow, Shore A65 rubber. This is a pourable rubber, but it can be easily thickened with PolyFiber II Thickener for brush-on application.

AP 74-45 Liquid Rubber

AP 74-45 Liquid Rubber is a two-part liquid polyurethane system that cures (RTV) to a yellow, Shore A45 rubber. This is a pourable rubber, but it can be easily thickened with PolyFiber II Thickener for brush-on application.

Please visit Architectural Polymers – Concrete Formliners (apformliner.com) for inquiries or to place an order.

Accessories Documents

pdf

75-65 Series AB Label


pdf

75-65-79-80B SDS


pdf

2550 Release


pdf

2550 Release SDS


pdf

AP Terra Cotta Qualification Form


pdf

Mold Dressing Label


pdf

MSW Brick Wax TDS


pdf

MSW Brick Wax SDS


pdf

MCA TDS


Architectural Polymers