Architectural Polymers

MCA/MCIA Construction Adhesive is used to adhere thin brick to plastic formliner.

Construction Adhesive from Architectural Polymers is available in either standard (MCA 1.0) or inverted (MCIA 1.0) aerosol cans.

MCA TDS

Directions for use
1. Prepare application surfaces by removing all oil, dirt, dust, etc.
2. Shake can well before use.
3. With valve facing surface, spray at a distance of 8-10 inches, constantly moving the can to prevent build up on the substrate.
4. Apply adhesive on both surfaces.
5. Before bonding surfaces, insure that the adhesive is dry to the touch. (Approximately 3-5 minutes)
6. When bonding surfaces, apply heavy pressure to achieve high bond strength.